EPEVER SOLAR Cost CONTROLLER Set up: TRACER AN Sequence CONTROLLE
EPEVER SOLAR Cost CONTROLLER Set up: TRACER AN Sequence CONTROLLE
Blog Article
The EPEVER Tracer AN Sequence Photo voltaic Charge Controller is a very economical photo voltaic controller designed for off-grid solar techniques. Based upon multiphase synchronous rectification engineering, it assures optimized Electricity conversion and procedure steadiness for a wide range of photovoltaic (PV) programs.
Crucial Characteristics with the EPEVER Tracer AN Collection Controller
The Tracer AN sequence makes use of EPEVER Photo voltaic Cost Controller technological know-how for superior solar energy harvesting. Important attributes consist of:
Multiphase Synchronous Rectification (MSR) for improved Power conversion.
Superior MPPT Algorithm with >99% efficiency.
Twin-Stage Charging for enhanced battery life.
LCD Display with real-time data monitoring.
Multiple Load Control Modes including manual and timer.
Comprehensive Digital Protections versus overcharging, around-discharging, shorter circuits, and reverse polarity.
Action-by-Action Information to Organising the EPEVER Tracer AN Sequence Controller
1. Unboxing and Preparing the Controller
Ensure all parts are bundled: Tracer AN device, temperature sensor, interaction cables, and consumer guide.
Verify the model quantity and voltage ratings match your solar panel and battery technical specs.
two. Mounting the Cost Controller
Pick a effectively-ventilated, dry area close to the battery lender.
Protected the Tracer AN controller using the offered mounting brackets.
Sustain correct clearance for heat dissipation.
three. Wiring the Photo voltaic Cost Controller
Caution: Always abide by good protection protocols and ensure the method is powered off right before connecting parts.
Stage 1: Hook up the battery terminals on the cost controller (good More info to favourable, detrimental to adverse).
Stage two: Hook up the solar panel array into the PV enter terminals.
Stage three: Link the load terminals if utilizing a direct load relationship.
Stage 4: Double-Test all connections for polarity and tightness.
4. Configuring the Controller Configurations
Electric power about the controller by connecting the battery initial.
Use the Liquid crystal display Show to navigate the settings menu.
Configure:
Battery Form: AGM, GEL, Flooded, Lithium.
Charging Parameters: Absorption voltage, float voltage.
Load Handle Modes: Manual, timer, gentle Handle.
five. Monitoring and Information Logging
The Tracer AN Collection supports actual-time checking using the MT50 remote meter.
Facts is usually logged by using the RS485 conversation port utilizing software program for instance Solar Station Computer system.
Distant monitoring is achievable With all the EPEVER WiFi module.
6. Troubleshooting Widespread Concerns
Issue one: No Power Output
Test battery voltage and connections.
Verify PV panel voltage exceeds battery voltage.
Challenge 2: About-Voltage Protection
Validate the solar array’s voltage ranking.
Adjust process parameters if essential.
Challenge 3: No Battery Charging
Inspect PV wiring for continuity.
Affirm MPPT configurations from the menu.
Advantages of the Tracer AN Collection with MSR Engineering
The multiphase synchronous rectification technological know-how guarantees:
Bigger Efficiency: Minimized energy losses for the duration of conversion.
Enhanced Dependability: Secure efficiency less than variable loads.
Extended Battery Life: Regular and exact charging profiles.
Conclusion
The EPEVER Solar Demand Controller with multiphase synchronous rectification technologies is undoubtedly an exceptional choice for optimizing solar energy technology and extending battery daily life. By following the above set up guide, buyers can make sure greatest performance and technique longevity.